Barn Door Hardware Rail 1.83m

Upgrade any interior space with this Black Steel I-Shaped Rollers Track Rail Bypass Sliding Barn Door Hardware Kit. Crafted from super-quality raw steel castings with a track thickness of 6mm, this kit offers exceptional carrying capacity with a maximum load of 330 pounds. The 1.83m rail is suited to standard single barn door installations and comes complete with all necessary accessories and a detailed instruction manual for a straightforward setup.

Specifications

Track Length	1.83m
Track Thickness	6mm
Maximum Load Capacity	330 pounds
Material	Raw steel castings, black finish
Door Type Compatibility	Single bypass barn door
Intended Use	Interior only
Door Thickness Required	4cm to 4.5cm
Baseboard Thickness Required	Approximately 2cm
Ceiling Clearance Required	Approximately 16cm from top of door to ceiling

Track Length Guide

For Single Door:
Track length = Door width x 2 + 10cm
Track length = Opening width x 2 + 20cm

For Double Door:
Track length = Door width x 4 + 20cm
Track length = Opening width x 2 + 20cm

Installation Requirements

Before beginning installation, ensure the following conditions are met:

• The distance from the top of the door to the ceiling should be approximately 16cm.
• Baseboard thickness should be around 2cm.
• Door thickness should be between 4cm and 4.5cm.
• The bottom of the barn door must be pre-cut with an opening of 20mm x 7mm prior to installation.

Installation Tools Required

The following tools are not included and will need to be prepared separately:

• Impact drill
• Spirit level
• Tape measure
• Socket wrench
• Hammer
• Pencil
• Screwdriver

Safety Notes

• Designed for interior use only. Do not install in outdoor or exposed environments.
• The track and wall connectors are pre-fixed and are not adjustable after installation.
• Door panels are not included. This kit supplies hardware only.

What's Included

• 1 x Barn Door Hardware Set, 1.83m
• 1 x Instruction Manual